Smart Payment System

1.PGR001-B/C Card Reader introduction
PGR001-C Coin selector form factor
PGR001-B Bill Acceptor form factor


PGR001-B/C Card Reader is a controller for the game machine, used to replace the Coin selector of game machine by the consumption contact-less IC card. The Card Reader parameters will update by the Setup card (it must be the card of configuration approved by Activated Station PGA101). The Card Reader is built-in with 6 sets of counters. It doesn’t need to connect any Computer, it is easy and reliable to use. It will help game field owner to reduce the personal costs and lower the risk of robbery of the coin box of the game machine.

 


Smart Card Reader PGR001-C
Coin Selector Model


7Coin Selector model ,easy to install at currently Coin Selector designed front panel
8LCD display window to show transaction message
9Built-in last 400 transaction records
101 channels credit pulse output, 1 channels payment pulse input
11System clock and parameters can configure at Activated Station, download to each smart card reader through parameter configuration card
12Easily and quickly to install and configure
133 modes to charge credit: by push button/ minimum amount/ all credit transfer
Smart Card Reader PGR001-B
Bill Acceptor Model


Bill Acceptor model, easy to install at currently Bill Acceptor designed front panel
1LCD display window to show transaction message
2Built-in last 400 transaction records
33 channels credit pulse output, 3 channels payment pulse input, 3 channels ticket pulse input
4System clock and parameters can configure at Activated Station, download to each smart card reader through parameter configuration card
5Easily and quickly to install and configure
63 modes to charge credit: by push button/ minimum amount/ all credit transfer

 
2. Product' Specification of Card Reader PGR001-B/C:

1. Microprocessor with D001 Chip

2. Built-in EEPROM, to keep the information from consumption and the configuration of system for the parameters

3. 3 LED lights, built-in Buzzer. Another set of additional LED and Buzzer for the expansion.

4. 3 keys for the handling similar to the Coin machine

5. Three channels of coin signal output, adjustable pulse width for the communication between the reader and the game machine

6. Three channels of Payout signal input to read the data sent by the game machine to the reader to process the amount of the card

7. By the key can select two modes of operation: System configuration mode and Normal sale mode

8. Way of consumption: by push bottom

9. Built-in real-time clock and Internal Lithium battery can maintain the clock in case of the power failure

10. Encryption chip applied, increases the security level of the system

11. Contact-less smart card: Philips Mi-Fare S70 smart card

12. Sensor range:4cm-8cm

13. Time of card reading: <0.3S

14. Power Consumption: 5w

15. Current Consumption: < 500 mA

16. Voltage: DC 12V

17. Maximum value by each operation: 0 ~ 50,000.00

18. Range of value can be recorded in the smart card: 0 ~ 99,000.00

19. Width of pulse that can be defined: 1ms ~ 250 ms

20. Accepted keying time per second: 3 times/ sec

21. Time of detection of card remove: 0.3s (Delay in LCD appearance: 2s)

22. Time of insertion of the card: 0.3s

23. Two form factors that can support machines design for coin selector or bill acceptor

3.Coin Selector Model PGR001-C DRAWING

3.Bill Acceptor Model PGR001-B DRAWING